Tecumseh Carburator Float Level On Craftsman Lawnmower?
August 27th, 2010 | 
Author: 
trash2cash
I found a Craftsman lawnmower in the trash that leaked gas. I replaced the carburator needle, and seat. It says to use a number 4 drill bit to adjust the float, but i could never find this particular drill bit in the store. Is their an alternative drill bit i could use instead, or is their another way?
Mini bikes
I found a Craftsman lawnmower in the trash that leaked gas. I replaced the carburator needle, and seat. It says to use a number 4 drill bit to adjust the float, but i could never find this particular drill bit in the store. Is their an alternative drill bit i could use instead, or is their another way?
Mini bikes
Related Posts
No related posts.
Posted in 
Tags:
level at full point. even distance to the top of bowl along top of float
0.209 inches and 5.309mm are the respective sizes for a number 4 drill bit. That is extremely close to the same size as number 4 copper wire. I guess you can go the hardware store with this information, but I think I’d check first with a small engine repair shop and see what they say..